Camouflage insulated suit

Camouflage insulated suit (jacket, pants) "Forest"

Technical description of the model

Jacket insulated straight silhouette with a central zipper, covered with a placket on the textile clasp. With a hood, detachable with a "zipper". With waist and bottom straps. A technical cord, which is fixed with a one-hole fastener and has tips on the ends, is inserted into the waist strap. At the bottom of the jacket, at the level of side seams, there are blocks with elastic cord.

Shelves are on a cut-off basque. The base of the shelf consists of two parts - upper and lower. Coquettes, with a fold at the bottom (width 4cm), which imitates the flap of the breast pocket. Breast pockets on the "zipper" 18cm located under the basque. Lower pockets with "zipper" 18cm, located on the lower part of the shelf and overlapped by the flaps - folds (width 4cm) from the upper part of the shelf. The bottom of the basque and the bottom of the middle part of the shelf is trimmed with a trim.

The back is on a cut-off basque, overstitched with a finishing stitch at 0.7 cm. On the back in the area of shoulder blades there are relief undercuts, for freedom of movement and overstitched with a finishing stitch by 0.7 cm.

The sleeves are fitted, single seam. At the top of the sleeves are two slash pockets with a zipper. The bag of the pockets is attached to the top of the sleeve with finishing stitching. Sleeves on the cuff with an elastic band (width 4.0 cm). The armholes of the sleeves are re-stitched with a finishing stitch at 0.2cm.

Stand collar. The lower stand is made of fleece. On the ends of the upper collar is stitched textile clasp (length. 6 cm.), to attach the hood and is covered with an additional bar. The additional strip is also inserted into the seam of sewing the "zipper" and the collar and serves to protect the face from the ends of the zipper.

The hood is removable, insulated, attached with a zipper. It is fastened at the ends with a textile clasp (width 2.5cm). The volume of the hood is regulated by an elastic cord with a one-hole sewn fixing. The hood consists of three parts - the central and two side parts.

The bottom of the jacket is on a wader with an elastic cord. The length of the cord is regulated by a sewn fixer at the level of the side seams of the jacket.

There are zippers on the sleeves and basques.

For convenience of use in the runners of the zippers of the pockets and the central clasp are inserted key chains in color.

Shelf and back of the jacket on fleece, sleeves on polyester lining. Two internal slash pockets with a zipper 18 cm on the shelves. Hood lining made of fleece.

Jacket insulation: shelves, back-syntepon 300 pl., sleeves, hood, collar - syntepon 200 density (in the hood and collar syntepon 200).

In the jacket, the size label is sewn into the neckline in the seam of the stand next to the branded hanger so that the size and height are clearly visible.

The care label is sewn into the left side seam of the lining at a distance of 20cm from the bottom of the jacket.

The branded paper tag is attached to the label holder at the top of the jacket rack.

Peculiarity: reinforced threads are used for sewing the jacket, for durability additional finishing stitches are laid along the seams of the jacket sleeves.

Material:

- camouflaged oxford top fabric, pl. 165 g/m2, composition: 100% polyester

- lining - fleece Strike melange, pl. 280 g / m2, 100% polyester

- lining fabric pl.52g/m2, 100% polyester

- insulator syntepon pl.200g/m2, 100% polyester

- microfleece pl.130g/m2 - collar, hood, windbreaker, 100% polyester.

Size: 88-132

Height: 158-188

Insulated pants with suspenders

Technical description of the model

Insulated pants, straight with a zipper.

The front halves of the pants with cut-off barrels and internal side pockets. There is a 0.7cm finishing stitch at the pocket entrance.

The back halves of the pants are notched.

To adjust the product to the height there are straps - suspenders on an elastic band (width 4.0cm). The straps on the front are adjusted with a textile clasp (width 4.0cm), on the back on an elastic band, the end of which is attached to the waistband with a textile clasp (width 4.0cm).

The belt is wide on one loop and a button, overstitched along the contour of the stitching at 0.2cm. On the inner side of the belt in the middle of the front halves and at the level of the middle seam adjusted loops of rep ribbon (width. 2.0cm) for fastening straps - suspenders.

The pants are lined with insulation. Syntepon of 200g/m2 density is used as an insulator. The lining is quilted with insulation.

The dimensional label and care symbol is inserted in the middle seam of the lining of the back half of the pants, not less than 5.0cm from the seam of the waistband.

Peculiarity: reinforced threads are used for sewing the pants, for durability additional finishing stitches are laid along the step seams and the seat seam at 0.2cm.

Material:

- camouflaged oxford fabric, wp. 165 g/m2, composition: 100% polyester

- lining fabric w.52g/m2, 100% polyester

- insulator syntepon w.1500g/m2, 100% polyester

Size: - 88-132

Height: -158-188

Note: production TORNADO (Ukraine).