Insulated jacket

Insulated jacket "Patriot" camouflage MM14

Straight silhouette jacket on insulated lining with a central zipper with two sliders. The "zipper" to the line of sewing in the collar closes the outer strip with textile fasteners (4pcs). The upper part of the right side of the zipper closes the shortened wind flap. The inner side of the wind flap is made of lining fleece. A puller is inserted in the "runner" of the zipper to facilitate fastening.

The garment has a combined sleeve, sewn-in hood, stand-up collar, waist and bottom waders.

The garment has a common front and back basque and a one-piece sleeve top.

In the front there are external upper and lower slash pockets with leaves, fastened with a zipper. Pullers are inserted in the "runners" of the "zipper" to facilitate fastening. The entrance to the pocket is on the side of the side of the shelves.

There are stitched textile fasteners "loops" for fastening identifiers on the flaps of the stripes above the pockets.

The back is straight with an elongated bottom.

The collar is a stand, the lower collar is made of fleece lining quilted with insulation. A hanger is sewn into the seam of the collar in the middle from the inside.

The combined sleeve consists of an upper and a lower part. The upper part consists of a front, an elbow part and a middle solidly cut part with the flaps of the front and back. On the middle solidly cut part of the sleeve there are external slash pockets with zippers. Pullers are inserted in the zipper runners to facilitate fastening. The entrance to the pockets is on the side of the stripes. Two strips of textile fastener "loops" with overlapping overlapping are set on the middle part of the sleeve, for fastening identifiers. The upper part of the strips of textile fasteners is finished with a seam in the fold with an open cut and forms pockets. On the lower part of the sleeve, on the elbow area there are special reinforcing pads. The sleeve has a shaped one-piece cuff, which can be turned away, and a sewn-in patch. The width of the sleeve at the bottom is regulated by a textile hook fastener.

Hood with a visor, lined. The hood consists of a middle part and side parts with two notches on each. The size and volume of the hood can be regulated by means of two sleeves: horizontal and on the front cut. On the front cut of the hood, in which the elastic cord with locks is stretched. Horizontal backstrap regulating the volume of the hood with an elastic cord, which is pulled through a loop on the middle part of the hood, elastic cord with a lock. Above the wader on the middle part of the hood there is a shaped flap, which covers the wader lock and fastens with a textile buckle.

The width of the jacket at the waist line is regulated with the help of a wader with an elastic cord and a lock. At the cuffs in the area of the wader on both sides of the jacket there are two holes in the form of loops, in which the elastic cord is stretched.

The width of the jacket underneath can be adjusted with the help of an elastic cord and locks. At the folds of the bottom of the front edge of the shelves on both sides of the jacket two holes in the form of loops in which the elastic cord is stretched.

The bottom of the jacket is finished with a seam in the fold with a closed cut on the shelves and paneling with a closed cut on the back.

The lining of the jacket is insulated. Shelf and back fleece lining quilted with insulation. Sleeves and hood - lining polyester, quilted with insulation. The lining of the left shelf has a patch pocket with a flap, which fastens with a textile clasp. At the bottom of the pocket in the seam of the pocket setting is the size of the product.

Material:

-top fabric - Rip-Stop with membrane coating;

-insulation (back/shelves) syntepon 200 g/m² quilted with 160 g/m² lining fleece, insulation (sleeves and hood) syntepon 150 g/m² quilted with lining fabric.

Production TORNADO Ukraine