Jacket insulated (new)

Jacket, insulated FROST (rip-stop)

Technical description of the model

Jacket of straight silhouette with a central zipper, button placket and detachable hood with a zipper.

Shelves and back with adjusted shoulder flaps, overstitched with finishing stitching at 0.2cm. The basques at the bottom are cut on the oblique line. There are 2.5 cm C/O ribbons under the basques of the back and the back.

There are slit side pockets with "zipper" on the shelves, which serve for the formation of breast and bottom pockets. The breast and bottom pockets are separated by a narrow cross-bar.

The sleeves are double-seamed. The bottom of the sleeves with an inner knitted wristband. Sleeves with reinforcing elbow pads. A finishing stitch of 0.2 cm is laid along the sleeve seam.

Collar - stand (lower collar fleece).

Hood, insulated with fleece, removable, attached with a "zipper". The volume of the hood and the wader is regulated by a cord with locks, at the ends of which the tips are attached. On the middle part of the hood for height adjustment there is a flap, which fastens with a textile clasp. Above the hood flap there is a gray C/O tape 2.5 cm.

The bottom of the jacket is on a drawstring with an elastic cord. The length of the cord is regulated by a two-hole fastener at the level of the side seams of the jacket.

The shoulder pads of the shelves and back, the hood flap, the zipper stops and the pocket zipper lintel are made of the finishing fabric of black color (oxford).

The jacket is lined with insulation. On the left shelf of the lining there is a breast pocket made of the upper fabric, on which the branded blue label "Tornado" is stitched. In the shelves and back as insulation is used stitch-thermopay - syntepon density 100g/m2 reinforced additionally with syntepon 200g/m2, in the sleeves -syntepon density 200g/m2.

In the jacket, the label of the size tape is sewn into the seam of the collar over the hanger so that the size and height is clearly visible.

In the jacket, the care symbol is sewn into the left side seam at a distance of 20cm from the bottom of the jacket.

A branded paper tag is attached to the placket between the 1st and 2nd button.

Special feature: reinforced threads are used for sewing the jacket, for durability additional finishing stitches are laid along the sleeve seams.

Material:

- Rip-stop pl.250g/m2; composition: 66%hl. 34%pe

- oxford pl. 110g/m2; composition: 100%pe

- lining fabric stitch-thermopay 100% pe

- syntepon 300g/m2

Size: 88-92 to 120-124

Height: 170-176, 182-188

Color: gray

Note: production Ukraine .Manufacturer "Tornado". GOST 29335-92.