Winter jacket

Insulated jacket "Shturman - M"

Technical description of the model

Jacket insulated straight silhouette with a central zipper, covered by a placket on the textile clasp. With a hood, detachable with a "zipper". With a strap-culise at the waist and bottom line. A technical cord, which is fixed with a one-hole fastener and has tips at the ends, is inserted into the waist strap. At the bottom of the jacket, at the level of side seams, there are blocks with elastic cord.

Shelves are on a cut-off basque. The base of the shelf consists of two parts - upper and lower. Coquettes, with a fold at the bottom (width 4cm), which imitates the flap of the breast pocket. Breast pockets on the "zipper" 18cm located under the basque. Lower pockets with "zipper" 18cm, located on the lower part of the shelf and overlapped by the flaps - folds (width 4cm) from the upper part of the shelf. The bottom of the basque and the bottom of the middle part of the shelf is trimmed with a trim.

The back is on a cut-off basque, overstitched with a finishing stitch at 0.7 cm. On the back in the area of shoulder blades there are relief undercuts, for freedom of movement and overstitched with a finishing stitch by 0.7 cm.

The sleeves are fitted, single seam. At the top of the sleeves are two slash pockets with a zipper. The bag of the pockets is attached to the top of the sleeve with finishing stitching. Sleeves on the cuff with an elastic band (width 4.0cm). The armholes are stitched with a finishing stitch at 0.2cm.

Stand collar. The lower stand is made of fleece. On the ends of the upper collar is stitched textile clasp (length. 6 cm.), to attach the hood and is covered with an additional bar. The additional strip is also inserted into the seam of sewing the "zipper" and the collar and serves to protect the face from the ends of the zipper.

The hood is removable, insulated, attached with a zipper. It is fastened at the ends with a textile clasp (width 2.5cm). The volume of the hood is regulated by an elastic cord with a one-hole sewn fixing. The hood consists of three parts - the central and two side parts.

The bottom of the jacket is on a wader with an elastic cord. The length of the cord is regulated by a sewn fixer at the level of the side seams of the jacket.

For convenience of use in the runners of the zipper pockets and the central clasp inserted key chains in color.

Shelf and back of the jacket on fleece, sleeves on polyester lining. Two internal slash pockets with a zipper 18 cm on the shelves. Hood lining made of fleece.

Jacket insulation: shelves, back-syntepon 300 pl., sleeves, hood, collar - syntepon 200 density (in the hood and collar syntepon 200 is divided).

In the jacket, the size label is sewn into the neckline in the seam of the stitching stand next to the branded hanger so that the size and height are clearly visible.

The care label is sewn into the left side seam of the lining at a distance of 20cm from the bottom of the jacket.

The branded paper tag is attached to the label holder at the top of the jacket rack.

Special feature: reinforced threads are used for sewing the jacket, for strength additionally lay finishing stitches on the seams of the sleeves of the jacket.

Material:

- Duspo Dobby Milk fabric; composition p/e 100

- lining fabric pl.52g/m2

- fleece pl.200g/m2

- syntepon pl.300g/m2

- syntepon pl.200g/m2

Size: 88-132

Height: 158-188

Color: black

Note: production Ukraine.