Winter jacket

Insulated jacket "Concord"

Technical description of the model

Jacket, insulated straight silhouette, with a central zipper on the "zipper", covered by a placket on the textile clasp. The hood is unbuttoned with a "zipper".

Shelves with a basque. Coquettes, with a fold at the bottom. On the shelves slash pockets with "zipper", which serve to form breast and bottom pockets. The breast and bottom pockets are separated by a narrow crossbar.

The back is on a cut-off basque, overstitched with a finishing stitch by 0.7 cm.

The sleeves are fitted, single seam. There are two slit pockets with a zipper closure at the top of the sleeves. The bag of the pockets is attached to the top of the sleeve with finishing stitching. The bottom of the sleeve is on the cuff with an elastic band. Sleeve armholes are stitched with a finishing stitch at 0.2cm.

Stand collar. The lower stand is made of fleece. The ends of the upper collar are covered with a textile zipper for attaching the hood. To protect the face from the ends of the zipper, an additional strip is inserted in the seam of sewing the "zipper" and the collar.

The hood is removable, insulated, attached with a zipper. It fastens at the ends with a textile clasp. The volume of the hood is regulated by an elastic cord with a sewn fixator.

The bottom of the jacket is on a drawstring with an elastic cord. The length of the cord is regulated by a sewn-in fastener at the level of the side seams of the jacket.

Shelf and back of the jacket on fleece, sleeves on polyester lining. There are two internal slash pockets with zipper. Hood lining made of fleece.

Jacket insulation: shelves, back - syntepon density 300g/m2, sleeves, hood, collar - syntepon density 200g/m2.

In the jacket, the size label is sewn into the neck in the seam of the lower collar next to the branded hanger so that the size and height are clearly visible.

The care label is sewn into the left side seam of the lining at a distance of 20 cm from the bottom of the jacket.

The branded paper tag is attached to the label holder at the top of the jacket rack.

Peculiarity: reinforced threads are used for sewing the jacket, for durability additional finishing stitches are laid along the seams of the jacket sleeves.

Material:

- Tk.oxford 300 rip-stop black PU pl150g/m²; composition: 100% pe

- lining fabric pl.50-53g/m2; composition: 100% pe

- microfleece 130g/m2

- syntepon 200g/m2

- syntepon 300g/m2

Size: 88-92 to 120-124

Height: 170-176, 182-188

Color: black

Note: production Ukraine.