Belt 1PL
16
Belt 1PL
- Product Code:
- 12150
- Brand:
- "Торнадо"
- Availability:
- In Stock
Price:
16.40$
Size table
Make your choice.
(having made a choice and clicking “BUY,” you can continue shopping on the same page
by choosing a product in a different size/height/color/quantity)
16.40$
- Description
-
Safety belt with straps (type 1PL) is an individual protective device, in a set with other safety equipment is used to ensure safety during construction, installation, repair, rescue and rescue work at height or in wells, underground and above-ground tanks and communications (high-altitude climbing work - HAR), where there is a risk of falling and injury to workers performing these works.Thebelt ismanufactured in climatic version U, category 1 according to GOST 15150 with the lower temperature limit limited to -40°C.The belt isused to prevent the fall of a worker staying at height when performing WWR, to ensure its retention in case of a fall, to prevent a fall from height in the process of descent (ascent) of the worker, when performing works where there may be a need for emergency evacuation of the worker (possibly unconscious).Theuse of thebelt as an integral element of safety and rescue equipment in case of a worker's falling off provides stopping of his fall with the level of load safe for a person. In case of holding a person who is waiting for help or is unconscious, the strap belt provides his stay in a position close to vertical. The belt complies with the requirements of DSTU EN 361:2017, TU U 17.4-21582561-002-2004 , "Instructions on labor protection when working at height with the use of special safety equipment".
Design.General view of the belt (type 1PL) is shown in the figure:
1 - back element for attaching fall arrest devices, 2 - plate;3 - shoulder straps, 4 - auxiliary strap, 5 - chest tie, 6 - buckles;7 - hip straps.Thebelt ismade of polyamide tape (3) with a width of 50 mm.Metal adjusting buckles (6) are used to adjust the belt to the user's figure. The belt has a tag with the date of manufacture of the belt (month, year) and its individual number.The belt can be equipped with a shock absorber, which is connected to the back fastening element (1) .The weight of the belt without the shock absorber is 1.5-1.8 kg. Each belt is completed with a "Registration form".ATTENTION! It is forbidden to make changes or amendments to the belt design, to perform its repair. All changes concerning the belt design must be agreed with the manufacturer. - Reviews (0)
