Belt 2PL
19
Belt 2PL
- Product Code:
- 12150-01
- Brand:
- "Торнадо"
- Availability:
- In Stock
Price:
19.08$
Size table
Make your choice.
(having made a choice and clicking “BUY,” you can continue shopping on the same page
by choosing a product in a different size/height/color/quantity)
19.08$
- Description
-
Safety belt with straps (type 2PL) is a personal protective equipment, which, in combination with other safety equipment, is used to ensure safety during construction, installation, repair, rescue and rescue work at height or in wells, underground and above-ground tanks and utilities (high-altitude climbing work - HAR), where there is a risk of falling and injury to workers performing these works.Thebelt ismanufactured in climatic version U, category 1 according to GOST 15150 with the lower temperature limit limited to -40°C.The belt isused to prevent the fall of a worker staying at height when performing WWR, to ensure its retention in case of a fall; to prevent a fall from height in the process of descent (ascent) of the worker; when performing works where there may be a need for emergency evacuation of the worker (possibly unconscious).Theuse of thebelt as an integral element of safety and rescue equipment in case of a worker's falling off provides stopping his fall with the level of load safe for a person. In case of holding a person who is waiting for help or is unconscious, the strap belt ensures that the person remains in a near vertical position.Thebelt meets the requirements of DSTU EN 361:2017, TU U 17.4-21582561-002-2004 , "Instructions on labor protection when performing work at height with the use of special safety equipment".Design.General view of the belt (type 2PL) is shown in the figure.
1, 3 - back and breast element of fall arrest means attachment, respectively2 - plate, 4 - shoulder straps, 5 - hip straps, 6 - carabiner, 8 - buckleThebelt ismade of 50 mm wide polyamide tape. Metal adjusting buckles (8) are used to adjust the belt to the user's figure. The belt has a tag with the date of manufacture of the belt (month, year) and its individual number.The belt can be equipped with a shock absorber, which is connected to the back fastening element (1) .The weight of the belt without the shock absorber is 1.5-1.8 kg. Each belt is completed with a "Registration form".ATTENTION! Itis forbidden to make changes or amendments to the belt design, to perform its repair. All changes concerning the belt design must be agreed with the manufacturer. - Reviews (0)
