Jacket insulated

Jacket, insulated "Grey" lengthened

Technical description of the model

Jacket, insulated straight silhouette with a central zipper, with a hood, detachable with a "zipper" and a cuff on the bottom line. The cuff has an elastic cord, the length of which can be adjusted and fixed with two-hole fasteners. The central "zipper" is covered with a strip on a textile clasp (4 pieces *5.0cm) up to the seam of the stand.

Shelves on a cut-off basque. The base of the shelf consists of two parts - upper and lower. Coquettes made of finishing fabric, with a fold at the bottom (width 4,0cm), which imitates the flap of the breast pocket. Breast pockets with "zipper" are located under the basque on the upper part of the shelf. Lower pockets with "zipper" are located on the lower part of the shelf and overlapped with flaps - folds (width 4,0cm) from the upper part of the shelf. On the flaps above the entrance to the pocket for convenience there are loops of belt tape (width 2,5 cm). The bottom of the basque and the bottom of the middle part of the shelf is trimmed with a trim. Reflective tape (width 5,0cm) is set over the flaps - folds of the lower pockets.

The back is on a cut-off basque made of a finishing fabric, overstitched with a finishing stitch at 0.2 cm. The back consists of three parts - the central part and two barrels. Two reflective tapes (width 5.0cm) are stitched on the central part. There are 0.2cm finishing stitches along the seams of the barrels to the center part of the back.

The sleeves are fitted, combined, with two vertical reliefs, set with finishing stitches at 0.2 cm. The middle part of the sleeve consists of the upper and the lower part. The upper middle part of the sleeve is made of finishing fabric. On the lower middle part of the sleeve is adjusted reflective tape (width 5.0 cm). On the middle part of the left sleeve there is a patch pocket with a flap on a textile fastener (width 2,5 cm). A black "Tornado" tag is inserted in the seam of the pocket sewing on the left side. On the flap there is a loop from a belt strap for convenience (width 2,5 cm). The sleeves are on the cuff with elastic band inserts (width 4,0cm). The armholes are overstitched with a finishing stitch by 0.2 cm.

Stand collar. Bottom stand is made of fleece.

Hood is removable, insulated, attached with a zipper. Fastens at the ends with a textile clasp (width 2.5cm). The volume of the hood is regulated by an elastic cord with a two-hole lock. The hood consists of three parts - the central part and two side parts. The central part is made of finishing fabric.

The bottom of the jacket is on a wader, in which the elastic cord is drawn. The length of the cord is regulated by a two-hole fastener at the level of the side seams of the jacket.

For convenience of use in the runners of the zipper pockets and the central clasp inserted key chains in the color of the "zipper".

The jacket is lined with a polyester lining, the jacket shelf and back are quilted lining (squares 7,0*7,0cm). On the left shelf of the lining is an internal patch pocket made of the main fabric with a textile clasp (width 2.5cm). The pocket has a blue branded label. Hood lining is made of fleece in the color of the finishing fabric.

Jacket insulation: shelves, back - synthetic 300 density, sleeves, hood - synthetic 200 density (the hood is divided synthetic 200).

In the jacket, the size label is sewn into the neck in the seam of sewing in the rack next to the hanger so that the size and height are clearly visible.

The care label is sewn into the left side seam of the lining at a distance of 20cm from the bottom of the jacket.

The branded paper tag is attached to the label holder at the top of the jacket rack.

Special feature: reinforced threads are used for sewing the jacket, for durability additional finishing stitches are laid along the seams of the jacket sleeves.