Working suit "Pro"

Working suit (GOST) PROFI

Men's suit for protection against general industrial pollution and mechanical effects. The suit consists of a jacket and pants.

Jacket straight silhouette with a concealed central side fastener on the button loops. Shelves with a basque. On the seam of sewing coquettes is laid finishing stitch at 0.2 cm. On the shelves two breast and two lower patch pockets with a flap. The flaps of the breast pockets are sewn into the seam of the basque. When stitching on the chest pocket of the left shelf, a branded black label is inserted.

Back on the basque. A 0.2 cm finishing stitch is sewn along the seam of the basque.

The sleeves are double-seamed with button cuffs.

The collar is laid back.

The finishingstitches on the jacket are laid on: armholes, collar, elbow seam of the sleeve and the edge of the board at0.2 cm.

Patch pockets are set double finishing stitch at 0.2cm and 0.7cm from the edge. Double finishing stitches are laid along the edge of the flaps at 0.2cm and 0.7cm from the edge.

Straight silhouette pants. The waistband with the seams (5 pcs.). The front halves of the pants with a clasp "bow fold" on the loops - buttons. On the front halves of the pants two patch pockets, the pockets are included in the side seams. A branded black label is inserted into the left side pocket. Back half of the pants with darts.

Thefinishing stitches in the pants are laid along the step seams of the front halves, the seat seam, the darts and the waistband by 0.2 cm.

The patch pockets of the pants are set with double finishing stitching at 0.2cm and 0.7cm from the edge.

In the jacket, the size tape label is sewn into the collar seam next to the hanger so that the size and height are clearly visible. In pants, the size label is sewn into the middle seam of the back half at least 5.0 cm from the waistband seam.

In jackets, the care label is sewn into the left side seam at a distance of 20.0 cm from the bottom of the jacket. In pants - in the middle seam of the back halves, but not less than 5.0 cm from the waistband seam (near the size label).

The paper label is attached to the left side of the jacket between 1 and 2 loops.

Peculiarity: reinforced threads are used for sewing the suit, for durability additional finishing stitches are laid along the seams of the jacket sleeves, the seat seam and the trouser seam.

Material: cloth. Flight CSHK pl. 260 g/m 80% cotton 20% PE.

Size: 88-92 to 120-124

Height: 170-176, 182-188

Color: t/blue

Note: production Tornado TOV Tornado according to DSTUEN ISO 13688:2016