DAKAR jacket

Summer jacket "Dakar"

Technical description of the model.

Jacket for protection against general industrial pollution and mechanical effects (combined).

The jacket of straight silhouette with a belt with a button and a button and a center-board, concealed fastener with 5 loops and 5 buttons.

Shelves with coquettes and reliefs. The sides of the shelves are made of finishing fabric (brown color). There are patch chest pockets with flaps on the shelf, which are sewn into the seam of joining the sleeves with the shelves and fastened with a textile clasp. The flaps are made of finishing fabric (brown color). Left breast pocket and flap with beveled corners. Right breast pocket, under a cell phone, with volume on 3 sides and a flap with beveled corners. In the relief seams are side pockets at the entrances to which are installed holniteny. Above the right side pocket in the embossed seam is inserted the branded black label "Tornado". Inside, on the left shelf, a branded blue Tornado label is inserted.

Back with a basque and scallops. The sides of the back are made of finishing fabric (brown color). At the waist, the back is adjustable with straps, each of which fastens with a loop and two buttons.

There is a reflective tape 5.0 cm (gray) on the back and hem panels.

The collar is detachable, made of finishing fabric (brown color).

The sleeves are three-seam, fitted with reliefs. The lower front and back parts of the sleeves are made of finishing fabric (brown color). On the upper part of the sleeves in the area below the elbow line is set reflective tape 5.0cm (gray). The bottom of the sleeves is trimmed with cuffs with one loop and a button.

The collar, flaps, side parts of the back and back, lower front and back parts of the sleeves are made of finishing fabric (brown color).

The finishing stitching on 0,2cm is laid on: collar, armholes, reliefs of the shelves, back and sleeves, waistband, flaps, cuffs.

Double stitching at 0.2cm and 0.7cm is laid on the flaps and the left pocket.

The size label is sewn into the seam of the collar in the neckline together with the branded hanger "Tornado".

The care label is sewn into the left side seam of the jacket at a distance of 20.0cm from the bottom.

The Tornado branded paper tag is attached with a label holder to the left shelf, in the basque area between the first and second loop.

The jacket is sewn with reinforced threads.

Material: "Twill" pl. 235 g/sq.m, 65%hb 35%Pe;

Size: 88-92÷120-124

Height: 170-176, 182-188

Color: Beige with brown trim.

Note: Note: Production by Tornado TOV according to DSTU EN ISO 13688:2016