Tactical jacket

Tactical-Softshell windbreaker jacket NSU

Technical description of the model

Windbreaker jacket is made of interlayer membrane, which protects from dirt, moisture, cold and wind. The inner layer of the fabric is fleece, soft and pleasant to the body. The main advantage of things "softshell" is their high functionality and low weight. The fabric has a special structure and replaces several layers of different materials and perfectly warms without additional insulation. In this model, water-repellent zippers are used.

The jacket has a central zipper with a "zipper" braid, a hood with a retracting cord and locks. The upper part of the "zipper" braid on the left shelf closes the shortened wind flap, edged on the edge. Jacket with a cut-off barrel of the shelf and back, forming vertical relief lines.

Shelves with vertical reliefs coming out from the armhole line. There are vertical chest slash pockets "in a frame" on the shelves, which are fastened with a "zipper" braid. Inside the pockets there are special slits in the form of rubber plates for the output of the headset, and eyelets for the output of the elastic cord on the front neckline of the hood. There are two additional patch pockets (one smaller one under the other larger one) and an elastic band with a half-ring sewn into the right shelf pocket. There is a patch pocket with a textile clasp sewn on the left side.

The back with vertical reliefs coming out from the armhole line.

The sleeves are two-seamed. On the sleeves in the upper part and at the bottom of the left sleeve there are vertical slash pockets "in a frame", which are fastened with a zipper. Inside the pockets there are special slots in the form of rubber plates for the headset output. In the elbow area there are stitched reinforcement pads. The bottom of the sleeves is trimmed with elastic band. Additionally, the volume at the bottom of the sleeves is adjusted with textile cuffs (fastened with a textile clasp).

Under the armhole are processed ventilation holes, which are fastened with a "zipper" braid.

Stand collar with a pocket for storing the hood on the outside. The pocket fastens with a zipper.

The hood is fitted, consists of a middle and two side parts, has a visor and is conveniently hidden in the collar. When unfolded, the hood visor can be fixed to the lower part of the hood with a textile clasp. The hood is adjustable in width and at the front neckline by means of an elastic cord and a lock with a stopper. For this purpose there are eyelets in the back and bottom part of the hood at the front edges, through which the elastic cord is led outside. The ends of the cord on the front neckline are brought to the middle of the breast pockets through the eyelets.

The bottom of the jacket is shaped with an extension on the back, trimmed with a seam 2.0cm from the edge.

The width of the jacket at the bottom can be adjusted by means of the elastic cord. There are eyelets on the cuff at the level of side seams, through which the elastic cord with a lock and a limiter is looped outside. The lock is attached with a textile braid to the side seam allowances.

On the seam of the collar, on the edge of the sleeve reinforcement pads, on the perimeter of the pockets "in the frame", on the edge of the visor, on the edge of the front neckline of the hood, on the edge of the patch inner pocket of the left shelf is laid finishing stitches at 0.2 cm from the edge.

On the edge of the board, the collar, the reliefs of the shelf and back, the elbow seam, armhole, the finishing stitches are laid at 0.5 cm from the edge.

Double finishing stitches are sewn along the seam of the middle part of the hood at 0.2cm and 0.7cm from the edge.

The sleeve pockets are set with double finishing stitches of shaped shape at 0,2cm and 0,7cm.

The size label is sewn into the collar seam next to the hanger so that the size and height are clearly visible.

The care label is sewn into the seam of the zipper of the left shelf at a distance of 8.0-9.0 cm from the bottom.

The branded paper tag is attached to the edge of the shortened flap of the "zipper" braid.

Due to the light weight of the jacket is easy to transport, and it does not take up a lot of space in a backpack or bag. It is actively used by tourists, mountaineers, military, extreme athletes and people who like outdoor activities.

Material:

Cloak fabric softshell pl.270-300g/m2; composition: 100% pe

Size: 88-92 to 120-124

Height: 170-176, 182-188

Color: black

Note: production Ukraine .Manufacturer "Tornado". GOST 29335-92