Jacket insulated

Jacket, insulated "Grey" shortened

(on an elastic band)

Technical description of the model

Jacketon the belt, insulated, with a central fastening on the "zipper", with a hood, detachable with a "zipper". The central fastening - "zipper" is covered with a strip up to the top on a textile fastener (5pcs.*4,0cm).

Shelves consist of two parts - upper and lower. In the upper part of the left shelf there is a vertical chest pocket with a zipper. The lower part of the shelves is cut off on the oblique line from the finishing fabric. On the lower part of the shelves there are pockets with a zipper, which are overlapped by flaps - folds with a width of 4.0 cm from the upper part of the shelf. Reflective tape (width 5.0cm) is sewn over the flaps - folds of the lower pockets.

Back with a seam in the middle. On the seam of the middle back seam there is a finishing stitch at 0.2 cm. The lower part of the back is cut off along the oblique line, made of finishing fabric. Reflective tape (width 5.0cm) is adjusted along the bottom of the upper part of the back.

Sleeves, combined, with a vertical relief in the middle, adjusted finishing stitch at 0.2 cm. The lower part of the sleeve cut off along the oblique line, made of finishing fabric. At the bottom of the upper part of the sleeve is adjusted reflective tape width of 5.0 cm. On the left sleeve vertically located pocket with a zipper. Sleeves on the cuff of elastic tape (width 6.5cm*2). The armholes are overstitched with a finishing stitch at 0.2cm.

Stand collar. Bottom stand is made of fleece.

The hood is removable, insulated, attached with a zipper. The hood consists of three parts - the central and two side parts. The two side parts are made of finishing fabric. The volume of the hood is regulated by means of a technical cord and clips. At the ends of the cord there are tips.

For convenience of use in the runners of the "zippers" of the lower pockets and the left sleeve pocket there are trinkets of the finishing fabric color. Tornado branded black tape is inserted into the runner of the central zipper.

Insulated jacket with lining. There is an internal patch pocket on the left shelf of the lining, with a blue branded label on the pocket. Microfleece is used as a lining for the hood, shelves and back. Sleeve lining is made of polyester.

Jacket insulation: shelves, back, hood - syntepon 150 density (in the hood is divided syntepon 150).

In the jacket, the size label is sewn into the neckline in the seam of the stitching of the rack next to the hanger so that the size and height are clearly visible.

The care label is sewn into the left side seam of the lining at a distance of 20cm from the bottom of the jacket.

The branded paper tag is attached to the label holder at the top of the jacket rack.

Peculiarity: reinforced threads are used for sewing the jacket, for durability additional finishing stitches are laid along the seams of the jacket sleeves.

Material:

- raincoat fabric Duspo Milk or Oda pl.90-110g/m2

- lining fabric pl 75g/m2

- microfleece pl.130g/m2

- syntepon pl.200g/m2

Size: - 88-132

Height: -158-188

Color: - dark gray + red

Note: production Ukraine. Manufacturer "Tornado".